Elecal Electric Appliance Co., Ltd.  

Product Name: Sup1 Surge Protective Device Model NO.: SUP1 Certification: ISO9001-2000, CE, CB, CCC Function: Circuit-Breaker Failure Protection Type: Circuit Breaker Poles Number: 4 Structure: MCCB Installation: Fixed Arc-extinguishing Medium: Air Speed: Normal Type Circuit Breaker Operation: Manual Type Breaking Capacity: Low Voltage Circuit Breakers Trademark: ELECAL Transport Package: Carton Origin: Wenzhou Product Description Usage and application scopeSUP1 type surge protective device (short name "SPD") is suitable for AC 50/60 Hz,380V and the following electric power systems,such as TT, IT, TN-S, TN-C, TN-C-S. It protects the electric network shocked by the thunder or over voltage .Working condition:1.Height: not more than 2000m2. Operating temperature : normal -5~+40C Enlarge range: -40~+80C3. Relative humidity: on condition that room temperature 30%~90%4. Installed at no notability shocked and virated place5. Don't be contained in explosion medium,the medium such as air and dust (including conduction dust ) shouldn't come to the degree that can corrode metal or damage insulation.Model and meaningTripping deviceThere's tripping device designed on the modular of the protector. When the protector is over heat or shocked, the tripping device can automatically separate it from the electric net, at the same time showing the indication signal. It's green when the protector is normal, red when tripping.Remote signaling contactThe products can be produced available with the accessory of remote signaling contact. If one or more of modular of the protector is in malfuction, the contact will be closed, and sending the malfunction signal.Principal parametersMaximum continuous operating voltage : Uc 75 150 275 320 385 440 660V~Test grade:IIVoltage protect level: Up< 350 550 1000 1250 1500 1750 2500VMaximum discharge current : (8/20μS) Imax 40kANominal discharge currrent: (8/20μS) In 10 15 20kARemote communication terminal parameterType of remote communication terminalActiveTerminal normal powerUN/INAC: 250V/0.5A DC: 250V/0.1A, 125V/0.2A, 75V/0.5AConductor sectionSUP1-40/4-150Maximum single line: 1.5mm2Main Structure and Operating PrincipleIn three-phase four- line system , three phase lines and one zero line are connected protective device to the earth cable . (figure 1 ) . In normal situation , the protective device is high resistance , when the over voltage brings for electric network shocked by thunder or other reasons , the protective device will rapidly transmit in ns , then lead the voltage into earth and protect the electric equipment . As the surge voltage through the protective device and after disappear it will recover to high resistance and not influence the normal operating.Technical Parameters :Item75150275320440600Maximum continuous operating voltageUc75V~110V~50V~200V~275V~350V~20V~420V~440V~585V~600V~1600V~Nominal discharge currrent:In101520151515Maximum discharge currentImax404040404040Voltage protect level Up5kA≤350V≤550V≤1kV≤1250V≤1750V≤2.5kVIn≤450V≤750V≤1.5kV≤1750V≤2250V≤3kVResponse time ns≤25nsMax. fuse intensity125AgL/Gg100AgL/GgShort circuit current intensity50kA/50Hz25kA/50HzOperating temperature area40C ~+ 80CConductor sectionMin 1.5mm?sibgle lead, max. 35mm multi-twisting lead/35mm single laedInstallation frame35mm railOut casered hot shrink materialProtection classIP20Dimensionone stnadard module widthInstallation1. It is installed by standard 35 mm rail.2. The earth cable should choose the double color wire 4mm?whose length is not longer than 500 mm.3. To avoid the influence to the electric net after the protector is in malfuction, the protector connected to L line should be in series connect with a fuse. The appearance and installation dimension refer to the Fig. 3.Adjustment, operation, maintenance1. There's no need to adjust the protector after installation.2. The protector can automatically protect the electric net should it's installed rightly.3. When operating, check whether the modular scutcheon is red, at the same time check whether the indication red light is lighting, then can change the malfunction device.